Thermolag’s Area of Expertize
The company manufactures and trades in industrial textiles and converts these, into products for thermal insulation and protection, in a wide range of industrial application. Our woven and non-woven industrial textiles are well suited to rugged South African industrial conditions, where thermal insulation and protection is required. These textiles are relatively cheap and, can be easily shaped to suit the exact application.
Our Product Selection
*Pictures are only a representation of the products
Twisted Rope
Product Description
The product is suitable for thermal insulation and protection of hoses, cables and pipes. The rope exhibits good chemical stability and resists attacks from most agents except hydrofluoric and phosphoric acids and concentrated alkalis.
Round Braided Rope
Product Description
Thermoglass Round Braided Rope
Webbing Tape
Product Description
A superb insulating tape to be used for oven seals, pipe lagging, ducting gaskets, hose and cable protection, sealing over bolts and Hawaiian dividing curtains.
Electrical Insulation Tape
Product Description
Thermoglass electrical insulation tapes are woven from the fibreglass filament yarns. It will not burn, rot, generate mildew. It resists most acids. It has low coefficient of thermal expansion and is suitable for temperatures up to 500°C
Sleeving
Product Description
The product is suitable for thermal insulation and protection of hoses , cables and pipes. The sleeving exhibits good chemical stability and resists attacks from most agents except hydrofluoric and phosphoric acids and concentrated alkalis.
Sleeving Silicone Coated
Product Description
The product is suitable for thermal insulation and protection of hoses, cables and pipes. The silicone coating acts as an effective barriers for oil spills, UV protection and water splash.
Square Braided Packing
Product Description
Thermoglass Square Braided Packing
Cloth Loomstate
Product Description
Cloth Thermoglass
Operation Temperature 430°C
Special
Product Description
Quality Thermoglass Cloth
S-Cloth
Product Description
This product is a superior protection material. It is designed for extremely high temperatures either in terms of direct heat, radiant heat or molten metal splash. It is ideal as a furnace curtain and can be used in sleeving protection and insulation pillows. See Material Safety Data Sheet for further information.
Needlefelt
Product Description
A great insulating material either in felt form or as a covered layer.
Cloth Treated
Product Description
General Information
Operating Temperature
The operating temperature depends on the Application and but in general is over 600°C the material will withstand brief excursions up to 700°C.
Cloth Alufoil
Product Description
General Information
Operating Temperature
300°C to 450°C depending on the application and which side of material faces the heat. FINISH Aluminium Oxide Coated one side.
Cloth Silicone Coated
Product Description
Suitable for elevated temperature conditions where weathering is also a factor. White fibreglass side can be exposed to temperatures of up to 500°C for short periods of time. The grey sides to temperatures of up to maximum of 200°C for short periods. The grey side will also withstand direct flame heat for short periods. This material is not suitable for strong acid or alkali conditions.
Cloth Coated
Product Description
WELD-A is suitable for welding blanket application where non-itch is a requirement and a standard specifications is applicable.
Thermolag Fibre Glass Mesh
Product Description
Thermolag Fibre Glass Mesh is widely used for waterproofing in roofing applications, reinforcement for natural marble, plaster board, artificial and exterior insulation finish Systems.
Twisted Rope Glass Reinforced
Product Description
Ceramic fibre products are made from a melting of aluminium oxide and silica. The resultant fibres are white, cotton like in appearance and show a high thermal stability, low conductivity of heat and good chemical resistance.
As pure ceramic staple fibre cannot be processed to textile products, organic fibres are added as a spinning aid. The organic share of cloth, tapes and ropes is between 15% and 20%. These organic fibres will burn off on first thermal contact and will result in an ignition loss of up to 15%.
Twisted Rope Wire Reinforced
Product Description
Ceramic fibre products are made from a melting of aluminium oxide and silica. The resultant fibres are white, cotton like in appearance and show a high thermal stability, low conductivity of heat and good chemical resistance.
As pure ceramic staple fibre cannot be processed to textile products, organic fibres are added as a spinning aid. The organic share of cloth, tapes and ropes is between 15% and 20%. These organic fibres will burn off on first thermal contact and will result in an ignition loss of up to 15%.
Rope Lagging
Product Description
Non asbestos rope lagging is efficient in insulating pipework and is suitable for variety of high temperature sealing and caulking applications.
The rope lagging is of consistent diameter and displays good tensile strength.
Round Braided Rope Glass Reinforced
Product Description
Thermoceram braided ropes exhibit chemical stability resisting attack from most corrosive agents. Exceptions are hydrofluoric acids and phosphoric acids and concentrated alkalis. It also resists oxidation and reductions. If wet by water or steam, its thermal properties are resorted upon drying. No water of hydration is present.
Round Braided Rope Wire Reinforced
Product Description
Ceramic fibre products are made from a melting Of aluminium oxide and silica. The resultant Fibres are white, cotton like in appearance and show a high thermal stability, low conductivity of heat and good chemical resistance.
As pure ceramic staple fibre cannot be processed to textile products, organic fibres are added as a spinning aid. The organic share Of cloth, tapes and ropes is between 15% and 20% These organic fibres will burn off on first thermal Contact and will result in an ignition loss up to 15%
Webbing Tape Glass Reinforced
Product Description
Operating Temperature: 600°C continuous depending on the application and even higher for temperature excursions.
Webbing Tape Wire Reinforced
Product Description
Operating Temperature: 600°C continuous depending on the application and even higher for temperature excursions.
Square Braided Packing Glass Reinforced
Product Description
Thermoceram Square Braided Packing Glass Reinforced
Square Braided Packing Wire Reinforced
Product Description
General Information:
Ceramic fibre products are made from a melting of aluminium oxide and silica. The resultant fibres are white, cotton like in appearance and show a high thermal stability, low conductivity of heat and good chemical resistance.
Cloth
Product Description
A mixture of aramid, carbon and glass fibers which combine to provide high strength, high protection and high operating temperature.
Paper
Product Description
General Information
Thermoceramic Paper – Ceramic fibre is made from a mixture of silicone dioxide (SiO₂) and aluminium oxide (Al₂O₃), both in a very pure form which is melted in a furnace. This molten mass is then converted into a fibre. The filament diameters average 3 microns. For the production of yarn mixing the ceramic fibres with an organic fibre is necessary (viscose/ rayon). The yarn can be reinforced with glass (borosilcate E-Glass continuous filaments)/ cotton or metal cores.
Blankets
Product Description
Operating Temperature: 1260° C
Cloth
Product Description
General Information
A mixture of aramid, carbon and glass fibers which combine to provide high strength, high protection and high operating temperature.
EPDM
Product Description
Suitable for mild corrosion, and abrasive conditions.
Exhaust Insulation
Product Description
The Thermolastic wrap is applied in layers according to the temperatures involved normally 3 layers. For higher temperatures it is recommended that at least one plain insulation layer (knitted E- Glass without reflective film) is applied against the hot face with the reflective layers applied later.
Thermoshield
Product Description
The cloth is corrosion resistant, can withstand higher temperatures and can handle large multi-plane movements caused by thermal stresses. Expansion Joints using this material have been successfully used in Power Generating Plants, Smelters, refineries, flue gas ducts, wet and dry scrubbers, chemical plants, precipitations, bag-houses and fans.
Thermoshield has been shown to outlast conventional Expansion Joints materials while offering excellent cost/performance benefits over the life of the Expansion Joints.
Thermoboard
Product Description
Thermoboard experiences mechanical weakness in the temperature range of 200°C to 350°C.
This is a result of the chemical reaction in the binders. The thermal characteristics are not affected. The binders solidify in this range and the board retains mechanical strength above this temperature level. Users are advised that the Thermoboard should not be exposed to continuous operating temperatures in this range without mechanical support.
Fire BLankets
Product Description
General Information
Thermolag Fireblankets are for use in extinguishing fires in commercial, residential and industrial settings.
The use of a fireblanket is recommended for small, localised fires where a blanket can shroud the fire, and where the use of other extinguishing devices is not appropriate.
Bollows
Product Description
General Information
Bellows protect moving machinery parts from heat, dust, debris, molten metal splash, corrosive substances and industrial pollutants.
VM17 Insulation
VM17, a mouldable high-temperature insulation
Product Description
VM17, a mouldable high-temperature insulation is needed wherever hot gasses or fluids have to be passed without interaction with the environment by means of pipes. The Insulation system VM 17 is the optimal solution for this demand.
Quick Wrap
Product Description
Quick Wrap is a robust, lasting and cost sufficient repair kit which works on most kinds of pipes. It is a great alternative to traditional methods such as cementing, soldering, welding, sleeving and replacements.
Quick Stick
Product Description
Quick Stick is a steel reinforced putty durable enough to last a lifetime. It has the tensile strength of 6000 pounds per square inch when cured. This means a repair made with a one inch piece of Quick Stick could lift the weight of 3 automobiles. Cured, it is a very hard material. The proprietary blend of materials include steel reinforcement as well as the highest grade of epoxy, because of this it has a technical rating of D-87 hardness when cured.
Quick Patch
Product Description
Quick Patch is a No Mess, No Measuring, No Waiting, ready to use kit. This simple-to-use kit sets on wet surfaces, and will adhere to PVC, Metal, Wood, Fibreglass, Plastic etc.
