Heat Insulation
-
PRODUCT THERMOGLASS WEBBING TAPE CONSTRUCTION Plain Weave COIL LENGTH 30m THICKNESS 2mm AVAILABLE WIDTHS 25mm/ 40mm/ 50mm/ 65mm/ 75mm/100mm OPERATING TEMPERATURE up to 500°C depending on application FINISH LOOMSTATE GENERAL A superb insulating tape to be used for oven seals, pipe lagging, ducting gaskets, hose and cable protection, sealing over bolts and Hawaiian dividing curtains. -
DIAMETERS From 6mm TO 50mm LENGTH OF ROLL For 6mm : 100m For 10mm : 50m OPERATING TEMPERATURE Up to 450°C depending on the exact application. The material will withstand brief excursions temperatures depending on conditions FINISH LOOMSTATE GENERAL The product is suitable for thermal insulation and protection of hoses, cables and pipes. The rope exhibits good chemical stability and resists attacks from most agents except hydrofluoric and phosphoric acids and concentrated alkalis. -
Expansion Joints - Flexible Compensators
Our Expansion Joints are designed for South African conditions to match vibration, pressure, chemical and temperature exposure in varying applications. Here at Thermolagwe will manufacture your expansion joints according to your specific needs and requirements. -
QUALITY THERMOGLASS CLOTH WEIGHT 620g/m THICKNESS 0,8mm WEAVE TYPE PLAIN CONSTRUCTION WARP 54 ends per 10cm E-C9 TEX 550x1 , TEXT WEFT 50 picks per 10cm E-C9 TEX 550x1 , TEXT TENSILE STRENGHT WARP 2100 Newton WEFT 1990 Newton STANDARD WIDTH 1000mm LENGTH OF ROLL 50m OPERATING TEMPERATURE 500°C FINISH LOOMSTATE -
PRODUCT GLASS SLEEVING SILICONE COATED BASE SLEEVING E-Glass Braided WALL THICKNESS 1.0mm nominal plus 2mm silicone nominal STANDARD SIZE From 12mm to 100mm Other sizes available on request but with minimum order quantities to be negotiated STANDARD ROL LENGTH 50m OPERATING TEMPERATURE -20°C to +260° STRECTH +5mm -3mm FINISH RTVA Red Silicone Coating (also available in LOOMSTATE) GENERAL The product is suitable for thermal insulation and protection of hoses, cables and pipes. The silicone coating acts as an effective barriers for oil spills, UV protection and water splash. -
NAME TERMOGLASS SLEEVING BASE SLEEVING E-GLASS BRAIDED DIMENSIONS Inside Diameter 12 to 100mm WALL THICKNESS 2.5mm The sleeving is designed with a thicker wall than the industry norm to better manage thermal insulation and protections. ROLL LENGTH 15m OPERATING TEMPERATURE To a maximum of 450°C. The sleeving will withstand higher temperatures for short periods of time. STRECTH +4mm and -3mm FINISH LOOMSTATE GENERAL The product is suitable for thermal insulation and protection of hoses , cables and pipes. The sleeving exhibits good chemical stability and resists attacks from most agents except hydrofluoric and phosphoric acids and concentrated alkalis. -
WEIGHT 1760g/m² THICKNESS 1.1mm CONSTRUCTION SATIN WEAVE TENSILE STRENGHT WARP 2346 Newton WEFT 1830 Newton STANDARD WIDTH 1000mm nominal LENGTH OF ROLL 50m OPERATING TEMPERATURE Continuous usage 950°C but will perform at elevated temperatures according to the application. FINISH Hydrocarbon coating to improve handling and abrasion properties. GENERAL This product is a superior protection material. It is designed for extremely high temperatures either in terms of direct heat, radiant heat or molten metal splash. It is ideal as a furnace curtain and can be used in sleeving protection and insulation pillows. See Material Safety Data Sheet for further information. -
WEIGHT 660g/m² or 1500g/ m² or 4500g/m² THICKNESS 5mm/ 10mm/ 25mm STANDARD WIDTH 1200mm LENGTH OF ROLL 10mm/ 20m/ 35m OPERATING TEMPERATURE 400°C to 550°C FINISH LOOMSTATE GENERAL A great insulating material either in felt form or as a covered layer. See Material Safety Data Sheet -
Thermolag Fibre Glass Mesh is widely used for waterproofing in roofing applications, reinforcement for natural marble, plaster board, artificial and exterior insulation finish Systems. -
PRODUCT THERMOGLASS ELECTRICAL INSULATION TAPE DIMENSIONS WIDTH: 25mm/ 50mm/ 75mm THICKNESS: 0.2mm LENGTH: 50m TYPE E- Glass WEAVE TYPE Plain CONSTRUCTION WARP COUNT 23 ends WEFT COUNT 12 ends TENSILE STRENGHT WARP > 1400 Newton OPERATING TEMPERATURE 500°C Depending on application FINISH LOOMSTATE GENERAL Thermoglass electrical insulation tapes are woven from the fibreglass filament yarns. It will not burn, rot, generate mildew. It resists most acids. It has low coefficient of thermal expansion and is suitable for temperatures up to 500°C -
PRODUCT: TEHRMOGLASS HTW 700 GREEN WOVEN HIGH TEMPERATURE THERMOGLASS CLOTH COLOUR GREEN, RED or BLUE WEIGHT 1000g/m² THICKNESS 1.4mm CONSTRUCTION WARP 37 ends per 10cm EC9 TEX 1290x1, TEXT WEFT 35 picks per 10cm EC9 TEX 1290x1, TEXT TENSILE STRENGHT WARP > 2300 Newton WEFT > 2200 Newton STANDARD WIDTH 1000mm LENGTH OF ROLL 50m OPERATING TEMPERATURE The operating temperature depends on the Application and but in general is over 600°C the material will withstand brief excursions up to 700°C. FINISH HTW 700 GENERAL For higher temperatures look at Thermoglass HTW700 Niro. -
BASE CLOTH E-GLASS CLOTH WEIGHT OF BASE CLOTH 660g/m² approximate THICKNESS 0.6mm approximate WEAVE SATIN 1/7 CONSTRUCTION: WARP 190 tex approximate WEFT 190 tex approximate COUNT WARP 160 per 10cm (nominal) WEFT 150 per 10cm (nominal) STANDARD WIDTH 1000mm LENGTH OF ROLL 50m OPERATING TEMPERATURE -20°C to +180°C FINISH Grey PU Coating: One Side 463g APPLICATIONS Suitable for elevated temperature conditions where weathering is also a factor. White fibreglass side can be exposed to temperatures of up to 500°C for short periods of time. The grey sides to temperatures of up to maximum of 200°C for short periods. The grey side will also withstand direct flame heat for short periods. This material is not suitable for strong acid or alkali conditions. -
QUALITY THERMOGLASS CLOTH WEIGHT 440g/m THICKNESS 0,7mm WEAVE TYPE TWILL CONSTRUCTION WARP 65 ends per 10cm E-C9 TEX 550x1 , TEXT WEFT 54 picks per 10cm E-C9 TEX 550x1 , TEXT TENSILE STRENGHT WARP 1800 Newton WEFT 1725 Newton STANDARD WIDTH 1000mm LENGTH OF ROLL 50m OPERATING TEMPERATURE 430°C FINISH LOOMSTATE GENERAL SEE MATERIAL SAFETY DATA SHEET
