-
BASIC COMPOSITION: ALUMINO- SILICA BRAIDED YARNS AROUND CORE SHAPE: ROUND DIMENSIONS: 30mm DIAMETER and 30m long DENSITY: 500 to 510 kg/m³ REINFORCEMENT: THERMOGLASS CORE IN YARN CENTRE CARRIER: Viscose fibre (20%) in mix PRODUCT NUMBER: 726-71-300-000-0 OPERATING TEMPERATURE: 600°C depending on the exact application FINISH LOOMSTATE APPLICATIONS Suitable for sealing at high temperatures in doors, lids and flaps. GENERAL Thermoceram braided ropes exhibit chemical stability resisting attack from most corrosive agents. Exceptions are hydrofluoric acids and phosphoric acids and concentrated alkalis. It also resists oxidation and reductions. If wet by water or steam, its thermal properties are resorted upon drying. No water of hydration is present. -
REINFORCEMENT Fibreglass DIAMETRES FROM 6mm TO 50mm CONSTRUCTION Ends of ceramic yarn wound and twisted together in a single rope LENGTH OF ROLL For 6mm & 8mm :100m For 12mm and above :50m OPERATING TEMPERATURE 600°C depending on the exact application. The material will withstand brief excursion temperatures depending on conditions. FINISH LOOMSTATE CHEMICAL COMPOSITION SiO₂ - 50% to 52% Al₂O₃ - 47% to 49% TiO₂, Fe₂O₃, Mgo, Na₂O - Remainder GENERAL Ceramic fibre products are made from a melting of aluminium oxide and silica. The resultant fibres are white, cotton like in appearance and show a high thermal stability, low conductivity of heat and good chemical resistance. As pure ceramic staple fibre cannot be processed to textile products, organic fibres are added as a spinning aid. The organic share of cloth, tapes and ropes is between 15% and 20%. These organic fibres will burn off on first thermal contact and will result in an ignition loss of up to 15%. -
PRODUCT THERMOCERAM WEBBING TAPE GLASS REINFORCED WIDTH 50mm WEIGHT: 1000g/m² nominal THICKNESS: 2mm nominal YARN TYPE: Alumino silicate- viscose blend YARN REINFORCEMENT: Fibre glass strands LENGTH OF ROLL: 30m OPERATING TEMPERATURE: 600°C continuous depending on the application and even higher for temperature excursions. MELTING POINT: 1700°C FINISH LOOMSTATE GENERAL See Material Safety Data Sheet Tolerances on fabric materials are ± 5%
Johannesburg Tell: +27 11 397 4556
Cape Town Tell: +27 21 945 3109
Telkom Alt 1: +27 71 524 3617
Telkom Alt 2: +27 60 774 5165
Info@kapaf.com
Cape Town Tell: +27 21 945 3109
Telkom Alt 1: +27 71 524 3617
Telkom Alt 2: +27 60 774 5165
Info@kapaf.com
