-
CONSTRUCTION: Rope Lagging consists of low density glass fibres supported by ceramic fibres and enclosed in a braided glass yarn. GENERAL Non asbestos rope lagging is efficient in insulating pipework and is suitable for variety of high temperature sealing and caulking applications. The rope lagging is of consistent diameter and displays good tensile strength. The basic fibres are inorganic, sterile incombustible The product exhibits low thermal conductivity The product is suitable for temperatures up to excursions of 600°C. The product has good weathering properties No asbestos fibres present in this product. -
BASIC COMPOSITION: ALUMINO- SILICA BRAIDED YARNS AROUND CORE SHAPE: ROUND DIMENSIONS: 30mm DIAMETER and 30m long DENSITY: 500 to 510 kg/m³ REINFORCEMENT: THERMOGLASS CORE IN YARN CENTRE CARRIER: Viscose fibre (20%) in mix PRODUCT NUMBER: 726-71-300-000-0 OPERATING TEMPERATURE: 600°C depending on the exact application FINISH LOOMSTATE APPLICATIONS Suitable for sealing at high temperatures in doors, lids and flaps. GENERAL Thermoceram braided ropes exhibit chemical stability resisting attack from most corrosive agents. Exceptions are hydrofluoric acids and phosphoric acids and concentrated alkalis. It also resists oxidation and reductions. If wet by water or steam, its thermal properties are resorted upon drying. No water of hydration is present. -
PRODUCT: CERAMIC ROUND BRAIDED REINFORCEMENT: STAINLESS STEEL WIRE DIAMETERS: FROM 12mm to 50mm CONSTRUCTION: Increasing ends of ceramic yarn 560x2 with stainless steel wire reinforcing braided into a round rope of even diameter LENGTH OF ROLL: For 12mm to 19mm : 50m For 25mm and above : 30m OPERATING TEMPERATURE: 950°C depending on the exact application. The material will withstand brief excursion temperatures depending on conditions. FINISH LOOMSTATE YARN CHEMICAL COMPOSITIONS: SiO₂- 50% to 52% Al₂O₃- 47% to 49% TiO₂, Fe₂O₃, Mgo, Na₂O- Remainder GENERAL Ceramic fibre products are made from a melting Of aluminium oxide and silica. The resultant Fibres are white, cotton like in appearance and show a high thermal stability, low conductivity of heat and good chemical resistance. As pure ceramic staple fibre cannot be processed to textile products, organic fibres are added as a spinning aid. The organic share Of cloth, tapes and ropes is between 15% and 20% These organic fibres will burn off on first thermal Contact and will result in an ignition loss up to 15% -
DIAMETERS From 6mm TO 50mm LENGTH OF ROLL For 6mm : 100m For 10mm : 50m OPERATING TEMPERATURE Up to 450°C depending on the exact application. The material will withstand brief excursions temperatures depending on conditions FINISH LOOMSTATE GENERAL The product is suitable for thermal insulation and protection of hoses, cables and pipes. The rope exhibits good chemical stability and resists attacks from most agents except hydrofluoric and phosphoric acids and concentrated alkalis. -
REINFORCEMENT Fibreglass DIAMETRES FROM 6mm TO 50mm CONSTRUCTION Ends of ceramic yarn wound and twisted together in a single rope LENGTH OF ROLL For 6mm & 8mm :100m For 12mm and above :50m OPERATING TEMPERATURE 600°C depending on the exact application. The material will withstand brief excursion temperatures depending on conditions. FINISH LOOMSTATE CHEMICAL COMPOSITION SiO₂ - 50% to 52% Al₂O₃ - 47% to 49% TiO₂, Fe₂O₃, Mgo, Na₂O - Remainder GENERAL Ceramic fibre products are made from a melting of aluminium oxide and silica. The resultant fibres are white, cotton like in appearance and show a high thermal stability, low conductivity of heat and good chemical resistance. As pure ceramic staple fibre cannot be processed to textile products, organic fibres are added as a spinning aid. The organic share of cloth, tapes and ropes is between 15% and 20%. These organic fibres will burn off on first thermal contact and will result in an ignition loss of up to 15%. -
REINFORCEMENT: Fibreglass DIAMETRES FROM 6mm TO 50mm CONSTRUCTION Ends of ceramic yarn wound and twisted together in a single rope LENGTH OF ROLL For 6mm & 8mm :100m For 12mm and above :50m OPERATING TEMPERATURE 600°C depending on the exact application. The material will withstand brief excursion temperatures depending on conditions. FINISH LOOMSTATE CHEMICAL COMPOSITION SiO₂ - 50% to 52% Al₂O₃ - 47% to 49% TiO₂, Fe₂O₃, Mgo, Na₂O - Remainder GENERAL Ceramic fibre products are made from a melting of aluminium oxide and silica. The resultant fibres are white, cotton like in appearance and show a high thermal stability, low conductivity of heat and good chemical resistance. As pure ceramic staple fibre cannot be processed to textile products, organic fibres are added as a spinning aid. The organic share of cloth, tapes and ropes is between 15% and 20%. These organic fibres will burn off on first thermal contact and will result in an ignition loss of up to 15%.
Johannesburg Tell: +27 11 397 4556
Cape Town Tell: +27 21 945 3109
Telkom Alt 1: +27 71 524 3617
Telkom Alt 2: +27 60 774 5165
Info@kapaf.com
Cape Town Tell: +27 21 945 3109
Telkom Alt 1: +27 71 524 3617
Telkom Alt 2: +27 60 774 5165
Info@kapaf.com
